Advertisement
SPEAKERS
CONSOLE
WATER BOTTLE HOLDER
CONSOLE JOINT COVER
GRIP PULSE HANDLERAILS
ON/OFF SWITCH
POWER CORD
MOTOR COVER
MAST BOOT
CAUTION ATTENTION PRECAUCIÓN
GARDER LES MAINS ET
MANTENGA LAS MANOS
KEEP HANDS AND FEET
LES PIEDS LOIN DE
Y LOS PIES ALEJADOS
AWAY FROM THIS AREA.
CETTE REGION. LES
DE ESTA ÁREA.
HIGH-PRESSURE SHOCKS
AMORTISSEURS HAUTE
DESCARGAS DE ALTA
COULD
PRESSION PEUVENT
PRESIÓN PODRÍAN OCASIONAR
CAUSE BODILY INJURY.
CAUSER DES BLESSURES
LESIONES FÍSICAS.
CORPORELLES.
TRANSPORT WHEEL
FOOT LOCK LATCH DECAL
(UNDERNEATH FOOT LATCH)
10
TABLET/READING RACK
CONSOLE JOINT COVER
CONTROL PANEL AND DISPLAY WINDOWS
CONSOLE FAN
SAFETY KEY PLACEMENT
CONSOLE MAST
FOR CENTERING THE BELT
FOOT LATCH (UNDERNEATH DECK)
RUNNING BELT/RUNNING DECK
SIDE RAIL
ROLLER END CAP
REAR ROLLER
TENSION/ALIGNMENT BOLTS
TOOLS INCLUDED:
PRE ASSEMBLY
6 mm T-Wrench
F
UNPACKING
5 mm L-Wrench
F
Place the treadmill carton on a level flat surface. It is recommended that you place a
PARTS INCLUDED:
protective covering on your floor. Take CAUTION when handling and transporting this unit.
Never open box when it is on its side. Once the banding straps have been removed, do not
1 Main Frame
lift or transport this unit unless it is fully assembled and in the upright folded position, with
F
1 Console Assembly
the lock latch secure. Unpack and assemble the unit where it will be used. The enclosed
F
treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never
2 Console Masts
F
grab hold of any portion of the incline frame and attempt to lift or move the treadmill.
2 Console Mast Boots
F
1 Hardware Kit
F
1 Safety Key
F
WARNING
1 Audio Adapter Cable
F
1 Bottle of Silicone Lubricant
F
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from
(for 2 applications)
packaging until specified to do so in the assembly instructions. You may remove the
1 Power Cord
F
plastic wrap from console masts.
2 Console Joint Covers
F
2 Grip Pulse Handlerails
F
WARNING
NEED HELP?
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
If you have questions or if there
are any missing parts, contact
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially
Customer Tech Support.
threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such
as lithium bike grease is recommended.
11
Advertisement
