Table of Contents
Advertisement
Installation
Activating the Leica DI C800
Registering the Leica DI C800 at the control unit
➩ Select the "Setup" entry in the "Service" menu.
➩ Switch to the "Device List" tab.
➩ Select DI C800 and press the "Toggle" button.
DI C800 "present" is displayed in green.
The Leica DI C800 is registered at the control unit.
➩ Leave the menu using "Back".
Setting up the Leica DI C800
Set the minimum and maximum for brightness on the Leica DI C800
➩ Select the "Setup" entry in the "Service" menu.
➩ Switch to the "DIC800" tab.
➩ Set the brightness with the "+" or "–" button.
Or
➩ Click the brightness adjustment bar directly.
Leica DI C800 / Ref. 10 743 250 / Version 00
Briefly clicking the "+" or "–" button changes the brightness value in
increments of 1. If the button is held down, the value changes in
increments of 5.
Installation
7
Advertisement
Table of Contents
