Table of Contents
Advertisement
Available languages
Available languages
EN
Adjusting the
result (scale
adjustment)
12
that the previous
average value will not
affect the average value
of the new load.
Make the measurement
as usual. When the
result is displayed press
the Menu -button until
Adjust+ or Adjust-
appears on the left lower
edge of display. Then
press the ON/OFF-
button until the needed
value is displayed. Each
time you press the
ON/OFF-button 0,1
moisture % will be added
to the result/ deducted
from the result.
When you are adjusting
the result the scale
adjustment value is
displayed on the left
edge of the screen.
For example: C+0,2%.
This value means that
the scale was adjusted
upwards for 0,2 moisture
percent.
When the needed value
is displayed, wait until
the meter will go off
automatically.
Note! This adjustment
is specific to the used
scale. In other words
there may be defined
specific adjustment for
Advertisement
Table of Contents
