Farmcomp Wile 65 Operating Instructions Manual page 11

Erasing the
average
calculation
memory
For example: A#5
A22,6%.
The values used in the
example mean: A#5 –
the number of
measurement results
saved for average
calculation is 5. A22,6%
- the average value of
those 5 measurements is
22,6%. To return to main
menu without erasing the
memory press ON/OFF.
Switch on the meter. List
the options by pressing
the Menu -button until
Average appears on the
display and then press
ON/OFF. The number of
measurement results
saved for average
calculaton and the
average value of those
measurements will
appear on the display.
Now you can erase the
average with a single
press on the Menu –
button. Always check
that after the average
memory has been
erased A#0 appears on
the display. To return to
the main menu press
ON/OFF.
Note! Always remember
to erase the average
memory after the
measurement series so
EN
11