AudioCodes Mediant 3100 Hardware Installation Manual page 31

CHAPTER 6 Hardware Maintenance
Figure 6-5:
c. Place your other hand under the faulty Power Supply module for support and then
slide the module completely out of the chassis. Avoid touching the top of the module
as it may be hot from being in the chassis.
Figure 6-6:
2. Install the new Power Supply module:
a. Grip the handle of the Power Supply module with one hand while supporting it
underneath with the other hand.
b. Orientate the Power Supply module as shown in the previous figure and align it with
the chassis slot from which you removed the faulty module.
c. Gently insert the Power Supply module into the slot until it has engaged fully with the
chassis backplane and a "click" sound heard when the release latch of the module locks
it into the slot.
d. Connect the Power Supply module to the power source.
Handle and Release Latch on Power Supply Module
Removing Power Supply Module from Chassis
- 27 -
Mediant 3100 | Hardware Installation Manual