CHAPTER 6 Hardware Maintenance
b.
Remove the Fan Tray module:
i.
ii.
2.
Install the new Fan Tray module:
a.
Install the Fan Tray:
i.
ii.
Loosen the four flat-head, spring-loaded captive screws (see #1 in following figure)
securing the Fan Tray module to the chassis, using a flat-head or Phillips
screwdriver.
Grip the handles (see #2 in following figure) of the Fan Tray module, and then
gently pull the module away from the chassis in the same plane.
Figure 6-1:
Removing Fan Tray Module
Orientate the Fan Tray module like in the previous figure.
Grip the handles of the Fan Tray module, and then gently insert the module into
the front panel opening, while making sure that it is horizontally aligned with the
chassis.
Mediant 3100 | Hardware Installation Manual
- 23 -