AudioCodes Mediant 3100 Hardware Installation Manual page 3

Sbc & media gateway

Hide thumbs Also See for Mediant 3100:

Table of Contents

Notice

Ethernet port interface cabling must be shielded and routed only indoors (must not

exit the building).

The device must be connected to a grounded AC power outlet.

Use only the AC power cords supplied with the device to connect to the power

source.

Caution Electrical Shock: Do not open or disassemble this device. The device

carries high voltage and contact with internal components may expose you to

electrical shock and bodily harm.

The device must be installed and serviced only by qualified service personnel.

Disconnect the device from the mains and Telephone Network Voltage (TNV) before

servicing.

The device must be installed only in a restricted access location that is compliant with

ETS 300 253 guidelines where equipotential bonding has been implemented.

Installation of this device must be in a weather protected location of maximum

ambient temperature of 40°C.

Table of Contents