AudioCodes Mediant 3100 Hardware Installation Manual page 21

CHAPTER 5 Cabling the Device
4
5
6
7
8
➢ To connect the serial interface port to a computer:
1. Connect the RJ-45 connector, at one end of the cable, to the device's serial port (labeled
CONSOLE), located on the chassis' front panel.
RJ-45
Internally used
Internally used
Receive Data (RXD)
Ground (GND)
Internally used
- 17 -
Mediant 3100 | Hardware Installation Manual
DB-9 Female
Data (RXD)
5
5
3
4
7
Not used
Not used
Transmit
Data (TXD)
Ground
(GND)
Not used