Advertisement
Installation, operating and maintenance instructions
Installing the hinge cover
Open the Fold&Slide system so the
sashes are at roughly
° to one
another.
This allows the set screws of the hinges
to be accessed from the side opposite
to the hinges.
Push the large cover from the hinge side
completely onto the hinge.
To fasten the cover to the hinge, screw
in the two set screws (see illustration)
completely by turning them clockwise
with a hexagon spanner.
Size
Push the small cover completely onto
the hinge from the hinge side.
To fasten the cover to the hinge, screw
in the set screw (see illustration)
completely by turning it clockwise with
a hexagon spanner.
Size
8
Advertisement
