Advertisement
Installation, operating and maintenance instructions
NOTE
NOTE
NOTE
Push the upper pivot-rest of the
Fold&Slide sash to be installed onto the
guide roll ( ).
Tighten the locknut on the guide roll
with the open-end spanner (size
to prevent the Fold&Slide sash from
slipping out ( ).
Depending on the size of the sashes, the
upper pivot-rest can be inserted more
easily with the sashes open.
After each individual Fold&Slide sash is installed, the gap between the threshold and frame
rebate must be adjusted .
The procedure for adjusting the gap is explained in chapter "Adjusting the bogie and guide roll"
on page 3 .
After installing each individual Fold&Slide sash, check the frame hinges of the fi rst Fold&Slide
sash and readjust if necessary.
.
)
.
2
Advertisement
