Disassembly - Suzuki DF300 Service Manual

6. Remove the oil pump driven gear 7.
NOTE:
• Sprocket bolt is LH thread.
• Hold camshaft by placing a wrench on the hexagon area of the
camshaft.
7. Remove the bolt securing oil pump drive sprocket 8 to cam-
shaft, then remove the oil pump drive sprocket and chain 9.

DISASSEMBLY

1. Remove the screw 1 securing oil pump rotor plate 2 to the
oil pump case, then remove the oil pump rotor plate.
2. Take out inner rotor 3 and outer rotor 4.
3. Remove the pin 5 and inner rotor 3.
POWER UNIT 6-23