Suzuki DF300 Service Manual page 242

• Disconnect cylinder temperature sensor lead wire connector
6.
• Disconnect OCV lead wire connector 7 at OCV.
• Remove the bolt 8 securing lead wire clamp plate.
On the STBD side bank
• Disconnect EX. manifold temperature sensor lead wire con-
nector 1.
• Disconnect IN. CMP sensor lead wire connector 2 at sensor.
• Remove the bolt 3 securing lead wire clamp plate.
• Disconnect OCV lead wire connector 4 at OCV.
• Remove the bolt 5 securing lead wire clamp plate.
Remove bolts and purge valve bracket 6 (with purge valve).
Remove the bolt 7 securing hose clamp plate.
Remove water flush hose 8 from cylinder block.
POWER UNIT 6-15