Table of Contents
Advertisement
Leveling Blade
The leveling blade can be used as an auto-leveling device when it
is in the float position (figure 1). If the blade is carrying too much
material, it can be pinned higher by inserting the pins in the upright
tower underneath the handle of the leveling bar (figure 2). It can also
be locked into place by using the adjustment pins above the bar to
create a box blade on your tool (figure 3).
Figure 3
Figure 2
Figure 1
Rail Blade (optional)
The optional TR3 E - Trevor Brazile Edition rail blade eliminates foot-
ing material buildup along the rail of a horse arena. This option saves
hours of labor by eliminating the need to manually rake out, tractor
accessible, arena edges. The breakaway shear bolt, edge wheel, and
edge marker stake pocket all contribute to assist the operator with
damage free operation near wood fences, walls, and rails. (Driveway
Marker Stake not included, available at local hardware). The rail blade
is installed by inserting the square tube into the square tube of the
grooming rod assembly. Line up the holes in the rail blade with the
holes in the square tube on the grooming rod assembly and insert the
included hitch pin to secure the rail blade in place.
8
© Copyright 2018 ABI Attachments, Inc.
Advertisement
Table of Contents
