Table of Contents
Advertisement
All of the components on your TR3 E-Series can be adjusted to your desired depth. Adjusting one component may
impact the way the other components engage.
Stabilizing Wheels
The wheels have three operating positions:
1.
The bottom hole on the axle block is the standard operation
position for general arena maintenance.
2.
The center hole will lower the frame deeper into the material
for more aggressive grading ideal for renovation work and
can be used for arena renovation.
3.
The top hole is for aggressive ripping. This setting will allow
you to achieve the greatest amount of depth. When the wheel
location is changed, you may need to make some
adjustments to your leveling blade.
Scarifying Teeth
The scarifying teeth loosen the ground to eliminate hard spots and
easily penetrate compacted arena footing and gravel driveway mate-
rial. They are primarily used in arena renovation and gravel driveway
work to break up compaction and should be used on their own with
the leveling blade and the finish rake. During daily arena mainte-
nance, the scarifiers can be pinned up and out of play. Excess wear
will be created by using them during daily grooming.
6
Components
© Copyright 2018 ABI Attachments, Inc.
Advertisement
Table of Contents
