Perenio PECWS01 Quick Start Manual

Dear Customer, thank you for choosing Perenio® products!
The Door & Window Sensor is sensitive to opening and closing of the door/
window on which it is installed. It is used as part of the Perenio Smart Building
Management System upon detection by Perenio® Gateway/IoT Router.
BASIC FUNCTIONS AND KEY BENEFITS
Compatibility
Specification*
Functions
Warranty
* This device is for indoor installation only.
PACKAGE CONTENTS
PECWS01 Door & Window Sensor, CR2032 Battery, Screw with Dowel, Reset
Pin, 3M Tape, 3M Sponge, Quick Start Guide, Warranty Card, Sticker.
INSTALLATION AND CONFIGURATION
1. Make sure that the Perenio® Gateway or IoT Router was pre-installed and
connected to the network through Wi-Fi/Ethernet.
NOTE. The Gateway or the IoT Router may be purchased as a standalone device or as
part of the Perenio® Smart Kit.
Doc Date: August 31, 2020
©Perenio IoT spol s r.o.
iOS (12.0 and higher), Android (5.1 and higher)
ZigBee HA 1.2 (Wireless connection distance: Up to 40 m),
battery operated (DC 3V, 125 mAh), 25±5 mm triggering
accuracy, white color, mounting bracket, LED indicator.
Dimensions: 45 mm x 45 mm x 19 mm. Operating conditions:
0°C to +45°C, 10% to 85% RH (non-condensing)
Ultra-low power consumption, removable panel, tool-free
installation
2 years (Service life: 2 years)
Version: 2.1.1
All Rights Reserved
1