Perenio PECLS01 Quick Start Manual

Dear Customer, thank you for choosing Perenio® products!
The Leak Sensor is generally intended to timely alert Users of water floods and
spills of other liquids in the area of installation. It may be used as part of the
Perenio Smart Building Management System upon detection by Perenio®
Gateway/IoT Router, or as a standalone signaling device.
BASIC FUNCTIONS AND KEY BENEFITS
Compatibility
Specification*
Warranty
* This device is recommended for indoor installation.
PACKAGE CONTENTS
PECLS01 Leak Sensor, CR123A Battery, Quick Start Guide, Warranty Card,
Sticker.
INSTALLATION AND CONFIGURATION
1. Make sure that the Perenio® Gateway or IoT Router was pre-installed and
connected to the network through Wi-Fi/Ethernet.
NOTE. The Gateway or the IoT Router may be purchased as a standalone device or as
part of the Perenio® Smart Kit.
Doc Date: August 31, 2020
©Perenio IoT spol s r.o.
iOS (12.0 and higher), Android (5.1 and higher)
ZigBee HA 1.2 (Wireless connection distance: Up to 40
meters), battery operated (DC 3V, 1300 mAh), high-decibel
alarm (up to 65dB), white color, IP67 Protection Class, LED
indicator, accurate triggering, 1.5 mm liquid level actuation,
floating function, low power consumption, compact design.
Dimensions: Ø60 mm x 21 mm. Operating conditions: 0°C
to +50°C, 20% to 90% RH
2 years (Service life: 2 years)
Version: 2.1.1
All Rights Reserved
1