Perenio PECSS01 Quick Start Manual

Dear Customer, thank you for choosing Perenio® products!
The Smoke Sensor is generally intended to timely detect smoke and visible
particles in the area of installation. It may be used as part of the Perenio Smart
Building Management System upon detection by Perenio® Gateway/
IoT Router, or as a standalone signaling device.
BASIC FUNCTIONS AND KEY BENEFITS
Compatibility
Specification*
Functions
Warranty
* This device is for indoor installation only.
PACKAGE CONTENTS
PECSS01 Smoke Sensor, CR123A Battery, 2x Screws with Dowels, Reset Pin,
3M Mounting tape, Quick Start Guide, Warranty Card, Sticker.
INSTALLATION AND CONFIGURATION
1. Make sure that the Perenio® Gateway or IoT Router was pre-installed and
connected to the network through Wi-Fi/Ethernet.
NOTE. The Gateway or the IoT Router may be purchased as a standalone device or as
part of the Perenio® Smart Kit.
Doc Date: August 31, 2020
©Perenio IoT spol s r.o.
iOS (12.0 and higher), Android (5.1 and higher)
ZigBee HA 1.2 (Wireless connection distance: Up to 40 m),
battery operated (DC 3V, 1500 mAh), high-decibel alarm (up
to 85 dB/3 m), white color, mounting bracket, LED indicator.
Dimensions: 60 mm x 60 mm x 49.2 mm. Operating
conditions: -10°C to +50°C, up to 95% RH (non-condensing)
Timely detection of smoke, alarm testing function, ultra-low
power consumption, tool-free installation option
2 years (Service life: 2 years)
Version: 2.1.1
All Rights Reserved
1