Table of Contents
Advertisement
Address Counter
ADDRESS LAYOUT
ADDRESS RECOVERY
Bar Width
BARCODE
BARCODE LOCATION
BOLD
BRAND
Break Char Count
Break Character
BREAK LOCATION
Brk Pause Time
BUNDLE BREAK
CALIBRATE SENSORS
Capture Overlay
CHAR ORIENTATION
Clear address +YES
Clear Counter
Clear Memory
Clear Overlay
Communication buffer
Conveyor On time
CONVEYOR SETUP
CONVEYOR TYPE
Courier
CR=CR LF=LF
DHCP
Distance from Left
Draft (200)
Executive (600)
Exit Sensor
FEED GAP
Feed Gap Distance
FEED GAP TYPE
Feeder Sensor
FEEDER SETUP
FEEDER SIGNAL
FEEDER TYPE
FONT NAME
FONT SIZE
Gateway Address
The process of reprinting specific addresses damaged by jams
or printing problems.
Width of the bar in a postal barcode.
Generic for any scan-able symbology.
Location option of Above, Below, Lower Right for POSTNET™
barcode in USPS lexicon.
Applicable Font characteristic.
Branding channel information for installation by service.
Number of times break sequence must appear.
Specifies character string to use as break sequence.
Break before or after piece with break information.
Amount of time to wait before restarting processing when a
break is encountered.
A break in mail processing located at a bundle interface
(specified by setting data).
A command to conduct the automatic calibration of the specified
sensor.
A command to capture the next piece as an overlay image.
In DOS mode can specify if the characters occur in a vertical
sequence.
Clears the batch counter (customer action).
Clears internal memory(usually associated with the
communication buffer.
Clears internal memory associated with storing an overlay.
The internal buffer that stores pending information from the print
stream.
A font name.
Options for line termination; CR- Carriage Return, LF- Line
Feed.
A print quality selection.
A print quality selection.
The name of a specific internal font.
The selected point size for a specific internal font.
Page 35 of 37
Advertisement
Table of Contents
