Removing The Oven Door; Demontage De La Porte Du Four - Zanussi Z 8050 G Instruction For The Use - Installation Advice

Table of Contents

Advertisement

REMOVING THE OVEN DOOR

The oven door can easily be removed as fol-
lows:
Open the door to the full extent (fig. 12.7A).
Attach the retaining rings to the hooks on
the left and right hinges (fig. 12.7B).
Hold the door as shown in fig. 12.7.
Gently close the door and withdraw the
lower hinge pins from their location (fig.
12.7C).
Withdraw the upper hinge pins from their
location (fig. 12.7D).
Rest the door on a soft surface.
To replace the door, repeat the above
steps in reverse order.

DEMONTAGE DE LA PORTE DU FOUR

La porte du four peut être facilement
démontée si I'on procède comme suit:
– Ouvrir complètement la porte du four (fig.
12.7A).
– Accrocher la bague de retenue au charnon
opposé des charnières de gauche et de
droite (fig. 12.7B).
– Saisir la porte comme illustré dans la fig.
12.7.
– En entrouvrant doucement la porte,
décrocher et extraire la broche inférieure
des charnières de leur emplacement (fig.
12.7C).
– Extraire
également
supérieure des charnières de son
emplacement (fig. 12.7D).
– Déposer la porte sur une surface douce.
– Effectuer les opérations en sens inverse
pour remonter la porte.
Fig. 12.7
la
baïonnette
Fig. 12.7A
Fig. 12.7B
Fig. 12.7C
Fig. 12.7D
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z 9050 g

Table of Contents