Replacing The Oven Light Bulb; Removing The Oven Door - Zanussi GC 20 M Instructions For The Use And Care

In the case of persistent spots you may
use normal non-abrasive detergents,
currently available on the market, or some
hot vinegar.
Never use steel-wool pads, chlorine or
similar products which might scratch,
grind or etch the metal.
Also, never close the cover while the
burners are still warm.
Replacing the oven lightbulb
Disconnect the appliance from the electric
supply.
Unscrew the lightbulb glass protection
from the oven. Unscrew the lightbulb and
replace it with a new bulb suitable for
high temperature (300 °C) and having the
following technical features:
Operating voltage: 240V - 50 Hz
Power absorbed: 15 W
Removing the oven door
(Fig. 8 A-B)
To thoroughly clean the oven you should
remove the door by proceeding as follows:
1.
With the aid of a coin, turn the oven door
stops (catches) 45° to the right.
See drawing A.
2.
Raise the door to the limit stop, press it
lightly against the oven and pull it out in a
forward direction.
Grasp the door on the two sides- don't pull
it by the handle. See drawing B.
11