Figure 67. Installing the IDSDM card
Next steps
Follow the procedure listed in
Removing a MicroSD card
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the IDSDM
card.
Steps
1. Locate the MicroSD card slot on the IDSDM card.
NOTE:
To locate IDSDM slot on the system board, see the
2. Press the card to partially release from the slot.
3. Hold the MicroSD card and remove it from the slot.
NOTE:
Temporarily label each MicroSD card with the corresponding slot number after removal.
After working inside your
Safety
Instructions.
Before working inside the
sled.
sled.
system board jumpers and
Installing and removing system components
connectors.
69