Chapter 31: Removing The Display Assembly; Prerequisites; Procedure - Dell XPS 15 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the wireless card.
Procedure
1. Remove the screw that secures the display-cable bracket to the system board.
2. Disconnect the touch-screen cable and display cable from the system board.
3. Peel off the tape and remove the touch-screen cable from the routing guides on the fan.
1. touch-screen cable (optional)
3. display-cable bracket
5. display cable
4. Turn the computer over and open the display at an angle of 90 degrees.
54 Removing the display assembly
Removing the display assembly
computer. After working inside your computer, follow the instructions in
2. tape
4. screw
31
After working
www.dell.com/