1. Align the screw holes on the system board with the screw holes on the palm-rest assembly.
2. Replace the screws that secure the system board to the palm-rest assembly.
3. Connect the power-adapter port cable, speaker cable, keyboard-control board cable, touch-pad cable, and touch-screen
cable to the system board.
4. Connect the display cable to the system board.
5. Align the screw hole on the display-cable bracket with the screw hole on the system board.
6. Replace the screw that secures the display-cable bracket to the system board.
Post-requisites
1. Replace the
memory
modules.
2. Replace the
heat-sink
3. Replace the fans.
4. Replace the
solid-state drive
5. Replace the
solid-state drive
6. Replace the
hard
drive.
7. Replace the
wireless
card.
8. Replace the battery.
9. Replace the
base
cover.
44
Replacing the system board
assembly.
(half-length).
(full-length).