Installing speakers
1
Place the speakers into the slots on the computer.
2
Route the speaker cable through the routing channel.
3
Affix the adhesive tape to secure the speaker cable to the computer.
4
Connect the speaker cable to the connector on the system board.
5
Install the:
a
battery
b
base cover
c
microSD card
6
Follow the procedure in
Display assembly
Removing the display assembly
NOTE:
This process is for both nontouch and touch LCDs
1
Follow the procedure in
2
Remove the:
a
microSD card
b
base cover
c
battery
d
WLAN Card
e
DC-IN board
3
Remove the screw that secures the metal bracket of the display cable [1] and remove it from the system [2]. Then, remove the cable
from the system board [3] and flip over the computer [4].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
29