Removing The Display Assembly; Prerequisites; Procedure - Dell W15B Service Manual

Removing the display
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the stand.
2 Follow the procedure from step 1 to step 2 in
drive".
3 Remove the
4 Follow the procedure from step 1 to step 4 in
5 Remove the
6 Remove the microphone.
7 Remove the
8 Remove the camera.
9 Remove the fan.
10 Remove the
11 Remove the
12 Remove the speakers.
13 Remove the
14 Remove the
15 Remove the

Procedure

1 Remove the screws that secure the optical-drive data cable to the
display-assembly base.
2 Disconnect the touch-screen board cable and display-panel power cable
from their connectors on the display-assembly base.
72
back cover.
control-buttons
system-board shield.
heat sink.
memory module.
wireless card.
system board.
display cable.
computer. After working inside your
After working inside your
"Removing the optical
"Removing the
board.
hard-drive".