Removing The Display Assembly; Prerequisites; Procedure - Dell XPS 15 Service Manual

Identifier
Status

Removing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the base
2 Remove the battery (half-length)
3 Remove the wireless
Identifier
Status

Procedure

NOTE: The touch-screen cable is available only on laptop configurations
with touch displays.
1 Remove the screw (M2x2) that secures the display-cable bracket to the system
board.
2 Disconnect the touch-screen cable and display cable from the system board.
80
GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Released
computer. After working inside your computer, follow
After working inside your
GUID-B56E2301-3ABA-48D9-BC76-A2962E57BC12
Released
cover.
or the
card.
GUID-074C95E5-EC9E-47A6-9E61-EECF4480ECF1
Released
computer. For more safety best
battery (full-length).
Before
www.dell.com/