Chapter 3: Removing The Base Cover; Procedure - Dell XPS 15 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

Procedure
1. Close the display and turn the computer over.
2. Turn the system badge over and place it on the base cover.
3. Remove the screws that secure the base cover to the palm-rest assembly.
a. base cover
b. system badge
c. screws (12)
4. Using your fingertips, gently pry the base cover off the palm-rest assembly.
10 Removing the base cover
Removing the base cover
computer. After working inside your computer, follow the instructions in
3
After working
www.dell.com/