Table of Contents
Advertisement
Set required MTQ22-FBP parameters
The following steps describes how to set the required parameters on the MTQ22-FBP.
1. After the application is started (as administrator) select the MTQ22-FBP that you want to
configure in the Config Tool.
2. From the Select port drop down menu select the COM port associated to the MTQ22-FBP
and click connect. The number of the COM port varies, make sure to select the one con-
nected to the MTQ22-FBP.
STATUS
Approved
© Copyright 2019 ABB. All rights reserved.
SECURITY LEVEL
Public
DOCUMENT ID.
1SFC132374M0201
F I ELD BU S CO MMU N ICAT ION
REV.
LANG.
PAGE
B
en
12/23
Advertisement
Table of Contents
