Connections; Operation Of The Extinguishing Control Computer In The Fire Alarm System 8000 / Iq8Control; Extinguishing Control Computer 8010 Connected To The Analog Loop - Honeywell ESSER 8010 Operation And Installation Instructions Manual

12

Connections

12.1 Operation of the Extinguishing Control Computer in the Fire Alarm
System 8000 / IQ8Control
essernet
Fig. 50: Operation of the Extinguishing Control Computer in the Fire Alarm System 8000 / IQ8Control

12.2 Extinguishing Control Computer 8010 connected to the analog loop

FACP
8000 / IQ8Control
esserbus
transponder esserbus
Fig. 51: Extinguishing Control Computer 8010 connected to the analog loop
The Extinguishing Control Computer 8010 is only triggered through fire detectors that are directly
connected. It is not possible to trigger the LMST8010 through fire detectors connected elsewhere
within the system.
For additional information to the esserbus
(Part No. 798157).
FB 798955.GB0 / 09.07
®
esserbus ® / esserbus
®
®
transponder
Extinguishing Control Computer 8010 – 19-Inch
esserbus ® / esserbus
®
-PLus
®
communication transponder please refer to manual
® -PLus
73