Connecting Touchscreen Adapter Cable - Honeywell T5810XL Planning, Installation And Service Manual

Chapter 3 - Installing
9. Take the DC power cable from the IKB/OEP power supply adapter (51197184-100) and insert the
round DIN plug into the power connector receptacle on the IKB/OEP module assembly/adapter
(51305776-100).
10. Connect the existing OEP/IKB Keyboard HD15 cable to the HD15 OEP/IKB receptacle located on
the IKB/OEP assembly/adaptor (51305776-100). Secure the cable to the assembly/adapter by
tightening the thumbscrews located on the end of the cable.
11. Perform the following to connect the IEC power cord (51305830-100):
a. Connect one female end to the OEP/IKB power adapter (51197184-100).
b. Connect the other female end to the power entry.
c. Connect the male end to the original workstation power cord.
3.13

Connecting touchscreen adapter cable

3.13.1 To connect the supplied touchscreen adapter cable to
- 57 -