Honeywell T5810XL Planning, Installation And Service Manual page 41

Chapter 3 - Installing
6. Remove the plastic film release liners from the four (4) black anti-skid pads in the corners of the
mounting tray. This exposes a "tacky" surface that helps prevent the workstation from sliding.
7. Place the workstation on the mounting tray such that the front edge of the workstation bezel is flush
with the front surface of the mounting tray and centered side-to-side.Using the tray handle, push
the tray with workstation back into the console workstation mounting location.
8. Insert the side spacer assembly between the side mounting bracket and the workstation chassis.
Ensure you insert the side spacer assembly on both sides of the workstation.
- 41 -