Connecting To A Component-To-Bnc Video Source - Epson Pro L30000UNL User Manual

2. Connect the other end to the projector's HDMI port.
Parent topic:

Connecting to a Component-to-BNC Video Source

If your video source has component video ports, you can connect it to the projector using an optional
component-to-BNC video cable. Depending on your component ports, you may need to use an adapter
cable along with a component video cable.
1. Connect the component connectors to your video source's color-coded component video output
ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors
to your component video cable.
2. Connect the BNC connectors to the projector's R/Cr/Pr, G/Y, B/Cb/Pb ports.
Parent topic:
Connecting to Video Sources
Connecting to Video Sources
53