Art-Net Channel Definitions - Epson Pro L30000UNL User Manual

Art-Net Channel Definitions

Art-Net is an Ethernet communication protocol based on the TCP/IP protocol. You can control the
projector by using a DMX controller or an application system.
The following table lists the channel definitions used to control the projector in Art-Net.
Begin by setting channel 13 to Can control.
Note: When controlling the projector using Art-Net and performing operations from the remote control or
control panel, settings made by the DMX controller or application software may not be applied to the
projector correctly or may differ from the projector's actual status. If you want to apply control for multiple
channels to the projector, set Channel 13 to Cannot control before you make any other settings. Then
set Channel 13 to Can control after setting multiple channels. You can then control the projector without
changing the setting for Channel 13.
Channel/Function
1 Adjusting light
(dimming)
2 Shutter control
3 Switch source
4 Lens position
Operation
0% to 100%
Shutter closed
Non-operational
Shutter open
Non-operational
HDMI
HDBaseT
DVI-D
SDI
Computer
BNC
LAN
Non operational
Move to home position
105
Parameters
0 to 255
0 to 63
64 to 191
192 to 255
0 to 7, 16 to 23, 40 to 47,
64 to 71, 88 to 255
8 to 15
24 to 31
32 to 39
48 to 55
56 to 63
72 to 79
80 to 87
0 to 31, 64 to 255
32 to 63
Description
Adjusts the image
brightness (default is
0)
Closes and opens
the shutter (default is
128)
Switches to the
specified source
(default is 0)
Shifts the lens to the
home position
(default is 0)