Table of Contents
Advertisement
3. Type the projector's IP address into the browser's address box and press the computer's Enter key.
Note: You may need to log in to access some of the options on the Web Control screen. If you see a
log in window, enter your user name and password. (The default user name is EPSONWEB and the
default password is admin.)
You see the Epson Web Control screen.
1
Select Basic Control to control the projector remotely.
2
Select Test Pattern to display a test pattern
3
Select Crestron Connected to open the menu (if you enabled Crestron Connected in the
Network > Others menu)
4
Select Advanced to open the advanced menu screen.
5
Select Status Information to view the projector's status.
6
Select Remote Camera Access to take an image capture of the displayed image from a
remote location
7
Select Lens Control to adjust the lens (focus, zoom, and lens shift).
8
Select OSD Control Pad to change the projector's menu settings.
4. Select the option corresponding to the projector function you want to control.
Web Control Options
90
Advertisement
Table of Contents
