Epson Pro L30000UNL User Manual page 283

On/Standby Status Laser
(power) light light light
Flashing blue Off Off
Blue Blue Flashing
blue
Varies Flashing Flashing
blue orange
Off Flashing Flashing
blue orange
Off Flashing Off
blue
Off Flashing Off
blue
Off Flashing Orange
blue
Temp light Filter Status and solution
light
Off Off Preparing network monitoring. (Wait
for the light to remain orange before
unplugging the projector.)
Off Off The shutter feature is enabled.
Varies Varies Refresh mode is enabled
Off Off Internal error. Turn off the projector,
unplug the power cord, and contact
Epson for help.
Flashing Off A fan or sensor has a problem. Turn
orange off the projector, unplug the power
cord, and contact Epson for help.
Orange Off Projector is too hot.
• Make sure that the vents and air
• Clean or replace the air filter.
• Make sure the environmental
• If operating the projector at high
• If the problem persists, unplug the
Off Off The laser has a problem. Turn off the
projector, unplug the power cord, and
contact Epson for help.
283
filter are not clogged with dust or
obstructed by nearby objects.
temperature is not too hot.
altitude, turn on High Altitude
Mode.
projector and contact Epson for
help.