S&P CADB-HE ECOWATT Series Manual page 41

Horizontal models of sizes 40 and 54
IMPORTANT!
Particularities in the installation of horizontal versions LH and RH
For a correct evacuation of condensation generated into the heat exchanger, it is necessary to install
the unit with a minimum slope of 3º to the side where the extraction fan is placed:
SUPPLY FAN
Horizontal models size 40 and 54 are supplied with a perimetral bed. This bed must be in contact with
the ground or with a fl at surface. It is essential that the weight of the equipment is distributed between
all points of support to prevent unit deformation.
The installer must make sure that the ceiling structure and the securing elements can bear the
weight of the unit, taking into account that it is a dynamic load.
Model
40
54
Model
40
54
41
Weight (kg)
597
730
EXTRACT FAN
Weight (kg)
597
730