LOGO! Expansion Module
CM LON
8. To log a CM LON in on a LON Works network, you can
either press the "Service" button or enter the Neuron-ID
directly in the LON using the Installation Tool or by
reading the label with a bar code scanner.
9. The CM LON is then registered in the LON database and
ready for operation.
10. For further details regarding the LON installation, please
read the corresponding documentation.
3.2 The CM LON - operational status
The CM LON is a LOGO! expansion module. This module
has two LED displays:
"RUN/STOP" LED
"BUS" LED
The "RUN/STOP" LED will light in green, red or orange.
CM LON
J31069-D1263-U002-A2-7618
Communication with the LOGO!
Service LED
13