Table of Contents
Advertisement
CM LON
LOGO! Expansion Module
2.2.1 Connecting the power supply
The CM LON has been designed to serve as a Slave module
for the LOGO! controller. It must be connected to a 24 V
AC/DC supply voltage.
Please observe the relevant instructions that are found in the
product information that was included with your equipment as
well as the technical data regarding the permissible voltage
tolerances, main frequency and current consumption.
Connecting
How to connect the CM LON to the power:
CM LON ..... with
DC supply
Protect the CM LON with a
80 mA/slow action fuse, if desired (recommended).
10
CM LON ..... with
AC supply
J31069-D1263-U002-A2-7618
CM LON
Advertisement
Table of Contents
