Driving Behaviour - Sunrise Medical PowerTalk2 User Manual

8�2 Driving Behaviour
Parameter
Drive
Current Speed
Actual Speed
System Info
Handle detection
System temperature
Sensorbox battery voltage
BMS comm. status
Controller battery voltage
Controller battery current
WheelDrive Parameter List - E1801_20181018
Meaning
This value shows the real-time speed of the WheelDrive in km/h.
This value shows the user interface button that is chosen (1, 2 or 3).
This value shows the real-time sensor value for the detection of the handle
position. A positive value means the handle is closed. A negative value means
the handle is open. The WheelDrive will shut down when the handle is open.
The sensor switch value is set to 520.
This value shows the real-time system temperature, measured in degrees
Celsius. This temperature is measured by the controller.
This value shows the real-time voltage of the sensorbox battery in mV.
The minimum voltage for this battery is 2.4 V. At this voltage the sensorbox
starts beeping 5 times and batteries need to be replaced.
This value shows the communication status with the BMS in the battery pack.
Value 0=OK, value 1=offline, value 2=error.
When the communication fails the value will be 2.
This value shows the actual battery pack voltage in mV
This value shows the actual battery pack used current in mA
Rev.A 25