Table of Contents
Advertisement
Steps to set driving behaviour
1.
Go to tab Settings > Driving behaviour
2.
Unfold all 4 sub menus within Driving behaviour.
3.
Fill in the desired Mode under Driving Settings: Gentle, Normal, Sport or Custom
4.
In case mode Custom is chosen: fill in all 9 input fields within Custom support level 1, 2 and 3.
Note: In case mode is NOT on custom ("4") , the values within custom support level 1,2 and 3 are
ignored.
5.
Write the settings to the wheel by pressing button Write on the bottom.
6.
Do the same for the second wheel (see paragraph "save and load settings" for an exact copy of the
settings to the second wheel).
5�5�2 Save and Load Settings
The values within tab Settings can be saved and loaded.
Steps to save:
1.
Press Save settings
2.
Select the settings you want to save.
Warning: Left/Right wheel setting is also in the list. Deselect if you do not want to get the setting changed!
3. Press save and select a location.
Steps to load:
1.
Press load setting
2.
Select and open a file
Note: All changed fields are highlighted green
3.
Write the settings to the wheel by pressing button Write on the bottom.
16
PowerTalk2 User Manual - E1801_20181018
Rev.A
Advertisement
Table of Contents
