Table of Contents
Advertisement
Pre-sets
The WheelDrive is provided with 3 preset's (Gentle, Normal and Sport) and the possibility to make custom settings.
This is the input field, used to set the "Mode".
By entering "1, 2, 3 or 4" you activate one of the modes explained below:
"1" = Gentle:
Mode Gentle is suitable for people with low reaction speed who use the wheels mainly
indoors. The values that belong to this mode are displayed in field 2
"2" = Normal:
Mode Normal is the standard setting and suitable for most people
The values that belong to this mode are displayed in field 3
"3" = Sport:
Mode Sport is suitable for active people who often drive long distances outside or use
it on hilly terrain regularly.
The values that belong to this mode are displayed in field 4
"4" = Custom:
Mode Custom makes it possible to create a personalized setting. There are 3
parameters to set per support level, the range is 1-6. The 3 custom support levels correspond with
the 3 buttons on the User Interface.
The values can be entered in field
Explanation of parameters:
Motor power:
The motor power is a combination of torque and acceleration. With a high value it becomes more powerful and the
time to reach full power is shorter.
Sensitivity assist rim:
Determines the amount of assist rim displacement you need to apply to get support. With a high value, the
movement starts with a little displacement of the assist rim; with a low value it starts later, after more displacement.
Max. speed forward:
This determines the max. speed you can reach with the drive rim on flat surfaces. The maximum speed is 6 km/u,
corresponding with value 6.
PowerTalk2 User Manual - E1801_20181018
and can only be written when the Mode is set to "4".
Rev.A
15
Advertisement
Table of Contents
