Switching On / Off / Selecting The Temperature; Temperature Levels; Automatic Switch-Off; Cleaning And Care - Silvercrest SWD 100 C2 Operating Instructions And Safety Advice

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Start-up / Cleaning and Care
Switching on / off /
Selecting the temperature
Switching on:
Set the control unit
to switch on the heated blanket.
Note: The function display
ter switching the heated blanket on.
Switching off:
Set the control unit
heated blanket off.
Note: The function display
Selecting the temperature:
Set the control unit to the highest temperature
setting (setting 6). This will cause the heating
pad to warm up quickly.
ting the heated blanket for several
hours, we recommend setting the
control unit
to the lowest setting to
1
prevent the body from overheating
and to prevent potential subsequent
skin burns or a heat stroke.

Temperature levels

Set the control unit
ture (see Fig. A).
Level 0:
off
Level 1:
minimum heat
Level 2–5: custom settings
Level 6:
maximum heat

Automatic switch-off

Note: The heated blanket switches itself off auto-
matically after approx. 180 minutes. The function
display
on the control unit
2
flashing.
10 GB/IE
to level 1, 2, 3, 4, 5 or 6
1
will light up af-
2
to level 0 to switch the
1
will go off.
2
When opera-
to the desired tempera-
1
will then start
1
To switch the heated blanket back on, first se-
lect level 0 and after approx. 5 sec. select the
desired temperature level.
If the heated blanket is no longer used
after the timer expires:
– switch off the heated blanket (level 0),
– unplug from the socket,
– disconnect the plug-in connector
control unit
from the heated blanket.
1

Cleaning and Care

LIFE BY ELECTRIC SHOCK! Before
cleaning the heated blanket, always
unplug the mains plug from the socket and dis-
connect the plug-in connector
trol unit
from the heated blanket (see Fig. B).
1
Otherwise there is a risk of electric shock.
Use a dry, lint-free cloth for control unit
cleaning and care.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY!
Never immerse the control unit
in water or other liquids. It may otherwise be
damaged.
If the heated blanket is slightly soiled, use a
dampened cloth and a little liquid mild deter-
gent, if necessary.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Never
use chemical cleaning agents or
scouring agents to clean the heated blanket
and control unit
1
control unit
may otherwise be damaged.
1
The heated blanket is machine
washable. Set the washing machine
at an extra washing cycle for deli-
cate items at 30 °C.
Use a mild detergent at the dose recommended
by the manufacturer.
Please note, frequent washing will cause wear
on the heated blanket. It should therefore be
washed no more than a maximum of 5 times in
a washing machine during its lifetime.
, thus the
3
DANGER TO
, thus the con-
3
1
. The heated blanket and
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

100141

Table of Contents