Executing A Local Preset (Macro) - AMX Precis Installation & Operation Manual

The Remap PushButton keys dialog box in X
numbers associated with each key. When the key is selected, the macro
information appears at the bottom of the dialog box. The macro
designations for the keys cannot be remapped. See the X
File for more information on remapping keys.

Executing a Local Preset (Macro)

The Precis Remote must be in Macro mode to execute a local preset
(macro). Once you have executed a macro, the panel returns to Switch
mode. Put the panel in Macro mode again to execute another macro.
To execute a macro:
1. Press the Macro key to put the Precis Remote in Macro mode.
The Macro key flashes, and all other lights on the panel turn off.
When the Macro key starts flashing, you have 10 seconds to enter
the sequence for the macro before the panel reverts to Switch mode.
2. Press a Level key to select the level where the macro resides.
The Level key illuminates.
3. Press a Source or Destination key to select a macro. (Each key is
assigned a different macro, see page 3-4.)
The Macro key stops flashing, the macro is executed, and the panel
returns to Switch mode.
4. Repeat steps 1 through 3 for each macro you want to execute.
Precis Remote X/Y Control Panel
Executing Local Presets (Macros)
N
Connect shows the macro
N
Connect Help
3-5