AMX Precis Installation & Operation Manual page 28

Managing Configuration Files
6.1 XNConnect
System Requirements
N
Before installing X Connect, you need the following:
ä
®
Windows 95/98/2000
ä
233 MHz processor
ä
one serial port or Ethernet port
ä
4 MB of RAM
ä
5 MB of available hard disk space
ä
³ 800´600 screen resolution (1024´768 is recommended)
N
To install X Connect:
1. Close all other applications currently running on your PC.
2. Insert the AutoPatch Software & Documentation CD into your
CD-ROM drive to start automatically.
If the CD does not autorun, explore the CD folders and double-click
on the setup.exe file.
3. Follow the directions in the subsequent dialog boxes.
4. Review the READme.txt file* in the main installation folder at
C:\AutoPtch\Configuration Software<Version>
*Before installation, the READme file can be found at its default
location, CD:\Configuration\APConfig\
N
To launch X Connect:
1. From the Start menu, select Programs.
2. Select AutoPatch Applications (or other specific file group selected
during the install).
3. Select the Connect folder.
4. Select Connect.exe.
N
X Connect opens.
5. From the Communication menu, select your computer's
communication link (Serial Port or Ethernet).
6. Open the Communication menu again and select Change Comm
Settings. Make the necessary changes in the dialog box; click OK.
6-2
®
, Windows NT 4.0 , or XP Professional
Precis Remote X/Y Control Panel
®