Rear Of Panel; Technical Support - AMX Precis Installation & Operation Manual

Introducing the Precis Remote Panel

1.2 Rear of Panel

Power Links
Comm Link connectors
Figure 3: Rear view of a Precis Remote
On the rear of the panel you will find the following:
Power Links
Attachment points for a power cable. The left connector is rated for
7 to 12 volt DC with at least 500 mA. The middle and right connectors
are rated for 5 volt DC with at least 500 mA.
Comm Link Connectors
Two connection points which can be used for connecting to an
AutoPatch switcher or for connecting multiple Precis Remote Panels
N
using X Net link cables.

1.3 Technical Support

AutoPatch provides technical support 24 hours a day, 7 days a week
(except for U.S. holidays). Before calling technical support with a
question, please review the information in this guide. If this guide cannot
fully answer your question, have your serial number ready (located on
the rear of the Precis Remote) and call your authorized AutoPatch dealer
or call AutoPatch AutoAssist at: U.S. and Canada 800-622-0246 (toll
free) or International 509-235-2636. You can also reach us through our
web site: www.autopatch.com, or e-mail our AutoPatch Technical
Support Specialists at: support@autopatch.com
1-4 Precis Remote X/Y Control Panel