Chapter 5 - Adjusting Volume - AMX Precis Installation & Operation Manual

Adjusting Volume
For systems equipped with the Volume Control option, volume can be
adjusted from the following:
ä
Remote or Local Control Panel with volume control
ä
An external controller (computer, AMX, Crestron, etc.) via BCS
(Basic Control Structure) commands
The Precis Remote must be in Switch mode before it can be placed into
Volume Adjust mode. If you are unsure which mode the Remote Panel is
in, press the Cancel key — all the lights on the Control Panel turn off,
and the Remote Panel reverts to Switch mode.
The status of a destination's volume can be verified only from an external
controller via BCS commands. See the system's documentation or visit
the AutoPatch web site (www.autopatch.com) for information on BCS
commands and external serial control.
Precis Remote X/Y Control Panel 5-1