10 Electrical connection
10.1 Position of the connectors
X1
10.2 5-pin plug with 1-wire communication
Pin assignment: Plug/coupling for 5-pin
2
3
1
1 5
5
4
Plug assignment, 5-pin, with output assignment at the factory
The inputs and outputs can be reprogrammed specific to application.
Pin
1
Uv, 24 V DC supply voltage
2
Pulse output
3
Uv, GND supply voltage
4
Communication
5
Analogue output
www.gemu-group.com
Electric shock by high voltage
▶ Danger of injury or death caused by electric shock.
The measurement device must not be installed, wired or dismantled while live with
●
operating voltage.
The supply voltage of the product must be switched off during these procedures.
●
2
3
4
Signal name
CAUTION
15 / 34
10 Electrical connection
GEMÜ 3040