Taurus PROFESSIONAL 1 SLIM Manual page 13

- Do not submerge the appliance
in water or any other liquid, or
place it under a running tap.
- If the mains connection is
damaged, it must be repla-
ced. Take the appliance to an
authorised Technical Assistance
Service In order to prevent any
danger, do not attempt to dis-
mantle or repair it yourself.
- Clean all the parts of the pro-
duct that will be in contact with
food, as indicated in the clea-
ning section, before use.
- This symbol means that
surface could to get hot
during the use.
- Ensure that the voltage indicated on the
nameplate matches the mains voltage before
plugging in the appliance.
- Connect the appliance to a base with an earth
socket withstanding a minimum of 10 amperes.
- The appliance's plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
- Do not force the electrical wire. Never use
the electric wire to lift up, carry or unplug the
appliance.
- Do not wrap the cable around the appliance.
- Do not allow the connection cable to hang or
to come into contact with the appliance's hot
surfaces.
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
- This appliance is not suitable for outdoor use.
- Keep the working area clean and well lit. Clutte-
red and dark areas invite accidents.
- Do not force the electrical wire. Never use
the electric wire to lift up, carry or unplug the
appliance.
- Do not use or store the appliance outdoors.
USE AND CARE
- Fully unroll the appliance's power cable before
each use.
- Never connect the appliance without having first
of all filled the oil bowl
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Do not move the appliance whilst in operation
or if the oil is still hot. Once cooled, transport the
appliance using the handles.
- Use the appliance handle/s, to catch it or move
it.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Respect the MAX and MIN levels.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with physical, sensory or redu-
ced mental or lack of experience and knowled-
ge.
- Do not store or transport the appliance if it is
still hot.
- Never leave the appliance unattended while in
use.
- Never leave the appliance unattended when
in use and keep out of the reach of children,
as this is an electrical appliance that heats oil
to high temperatures and may cause serious
burns.
- If fat is used instead of oil, melt first in a separa-
te recipient.
- If fat has hardened in the tank, make a few
holes in the solid fat in order to allow the
water, which has been retained in the fat to be
released as steam when heated at the minimum
thermostat temperature.
- If, for some reason, the oil were to catch fire,
disconnect the appliance from the mains and
smother the fire using the lid, a cover or a large
kitchen cloth.. NEVER WITH WATER.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron