Table of Contents
Advertisement
Quick Links
Encase Fireplace Mantel
Model # : 90011, 90012, 90021, 90022
INSTALLATION MANUAL
Read and understand this entire installation manual, including all safety
information, before mounting the mantel on the wall. Failure to do so could
WARNING
cause the mantel to not be secured to the wall properly.
Keep this installation manual for future reference. If you sell or give this
CAUTION
product away, make sure this manual accompanies this product.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Touchstone 90011
Summary of Contents for Touchstone 90011
- Page 1 Encase Fireplace Mantel Model # : 90011, 90012, 90021, 90022 INSTALLATION MANUAL Read and understand this entire installation manual, including all safety information, before mounting the mantel on the wall. Failure to do so could WARNING cause the mantel to not be secured to the wall properly.
- Page 2 Encase Fireplace Mantel Table of Contents Unpacking Your Encase Fireplace Mantel ....................... 3 Parts and Hardware ..............................3 Tools Required ..............................3 What’s Included in the Box ..........................3 Installation ................................... 4 Choosing Installation Location..........................4 Installing Mounting Blocks ............................4 Mounting The Encase Fireplace Mantel........................
- Page 3 Encase Fireplace Mantel Unpacking Your Encase Fireplace Mantel Parts and Hardware Tools Required • Power Drill and Drill Bits • Stud Finder What’s Included in the Box Mantel - 1 Mantel Touch-up Paint – 1 Mounting Blocks - 2 2 ½” Screws For Wall Mounting - 4 2”...
- Page 4 Installation Choosing Installation Location • If mounting above a Touchstone Home Products Electric Fireplace, measure wall location so that location for mounting the Encase Fireplace Mantel meets the recommended clearances. • Minimum clearances (measurements taken from front of glass panel): Touchstone Wall Mounted Fireplace: 24”...
- Page 5 Encase Fireplace Mantel Installing Mounting Blocks – cont. 2. Once you have located 2 studs, mount the 2 mounting blocks on the wall using 2 2 ½” screws provided per each mounting block. **NOTE: Longer screws may need to be used for securing the mounting blocks to your wall depending on the surface of your wall.
- Page 6 Encase Fireplace Mantel Mounting The Encase Fireplace Mantel 1. After the mounting blocks are securely mounted on the wall, center the mantel over the mounting blocks. 800.215.1990 www.touchstonehomeproducts.com Update: 20201007...
- Page 7 Encase Fireplace Mantel Mounting The Encase Fireplace Mantel – cont. 2. Once the mantel is centered over the mounting blocks, use 4 2” screws provided to secure the mantel to each mounting block. 3. Once secured, your mantel is now ready for use. NOTE: The maximum weight that the mantel can support is 50lbs.
- Page 8 Encase Fireplace Mantel Warranty Touchstone Home Products®, Inc warrants our Encase Fireplace Mantel to be free of defects in material and workmanship for one year from date of purchase. Touchstone will replace any Encase Fireplace Mantel that is deemed defective or becomes defective during normal use within one year after the date of purchase.
Need help?
Do you have a question about the 90011 and is the answer not in the manual?
Questions and answers