Table of Contents
Advertisement
Quick Links
Stainless steel 50 inch Electric Fireplace w/3
colors&Sound Bar
Model Numbers: 80024
OWNER'S MANUAL
Read and understand this entire owner's manual, including all safety
WARNING
information, before plugging in or using this product. Failure to do so could
result in fire, electric shock, or serious personal injury.
Keep this owner's manual for future reference. If you sell or give this
CAUTION
product away, make sure this manual accompanies this product.
Advertisement
Table of Contents
Related Manuals for Touchstone 80024
Summary of Contents for Touchstone 80024
- Page 1 Stainless steel 50 inch Electric Fireplace w/3 colors&Sound Bar Model Numbers: 80024 OWNER’S MANUAL Read and understand this entire owner’s manual, including all safety WARNING information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury.
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION! WARNING Read all instructions before using this heater! This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater, and keep them away from the sides and rear. - Page 3 WARNING For residential use only! NOT for commercial use! Any commercial or public use of this heater voids all warranties, and could cause injury. This product is not intended to be a primary heat source. It is for supplemental heat only. ...
-
Page 4: Parts And Hardware
Parts and Hardware B-Wood Screws(7) C-Drywall anchors(7) A – Fireplace ( 1 ) G-Plastic Tray(1) RC – Remote Control (1) D-Fixing part F - Decorative Crystals Installation and Assembly Wall Mounted Installation Step 1. Find a safe location. Rear View of Fireplace Minimum clearance on each side: 12”... - Page 5 ALWAYS unplug this fireplace heater before assembly or cleaning, or before relocating. Failure to do so could result in electric shock, fire, or personal injury. Drywall Studs STEP 2. A. Locate the wall studs using an electronic stud-finder. Mark the hole locations with a pencil.
- Page 6 insert the two hooks on the bracket into the two slots on the back of the appliance. F. Check the appliance for stability ensuring that the bracket will not pull free from the wall. 13” (33cm) 13” (30cm) wall 12.8” (32.5cm) High Wood...
- Page 7 STEP A. Selection a dry wall to open a hole for fireplace box. Size of hole as below chart Figure ( A ) Model Number 80024 43.9” 19” STEP B. Fix the three wall anchors in each side of the fireplace box according to the...
- Page 8 Fixed glass parts...
- Page 9 Logset / Crystal / Pebble Ember Installation (NOTE:Please make the installation according to the embers which you bought or selected.) Glass/Stainless steel front must be removed and the appliance must be mounted in its final location before the logset / crystal / pebble embers are installed. If your fireplace come with logset, remove the logset from the package, put it to the fireplace designed place.
-
Page 10: Operation
3.Take off the inside glass 6.Replace to crystal glass(F) 1.Take off the glass/stainless 4.Take out steel front 2.Take off the log if the metal 5.Put the Plastic have strips tray(G) inside Crystal medias Operation Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. -
Page 11: Operating Instructions
Front View Top View Rear View Left Side View OPERATING INSTRUCTIONS 1.Operating panel switch and remote control BUTTON FUNCTION ACTION & INDICATION Turns the appliance ON/OFF. POWER Controls the Timer. 9 Settings: (0.5h, 1h, 1.5h, 2h, 2.5h, 3h, 3.5h, 4h, 4.5h、5h, 5.5h, 6h、6.5h, 7h, 7.5h) Press button TIMER until reach desired setting. - Page 12 COLOR button: Makes the color flame effect changing. NOTE: color effect stays on until power button is turned off. Color flame effect must be on for heater to turn on. COLOR FLAME button: Makes flame effect dimmer and brighter. NOTE: Flame effect stays on until power button is turned off. Flame effect must be on for heater to turn on.
-
Page 13: Bluetooth Operation
2.Speaker installation and removal Speaker cable Speaker cover Tear down the screws Speaker Tear down the screws on the speaker cover,Take out the speaker,Plug out the speaker cable, and cover the speaker 3.Bluetooth operation Bluetooth switch Panel switch 3.1 Long press the speaker boot and connect the speaker with a Bluetooth device 3.2 Volume increases when rotate to the right,and decrease when rotate to the left NOTE: This speaker does not contain batteries, it can not work independently, it need to access 5V charger... -
Page 14: Remote Control Battery Information
4. Bluetooth playback Long press the button to boot - the default Bluetooth mode (voice prompts to wait for connection) Phone Bluetooth On - Automatically searches for Bluetooth devices Locate the name "MX-LY" Bluetooth device - Select Connect Bluetooth audio voice prompt "Connection successful" Note: Bluetooth connection default without password, if prompted for a password, enter 0000 to connect The phone can be operated to play music... -
Page 15: Maintenance
Vents: Use a vacuum or duster to remove dust and dirt from the heater and vent areas. Plastic: Wipe gently with a slightly damp cloth and a mild solution of dish soap and warm water. NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface. Maintenance Risk of electric shock! DO NOT OPEN any panels other than the bulb replacement plate! No user-serviceable parts inside!
Need help?
Do you have a question about the 80024 and is the answer not in the manual?
Questions and answers